PRODUCT INFORMATION

Outside dimensions: Approximately 29.5cm x 17cm x 2cm. Cavity size: 10cm diameter

Note: It is good practice to apply mould release spray when using resin moulds.

Care Instructions

·      Clean with non-abrasive mild soapy water. Cleaning with solvents may cause the mould to become brittle and crack.

·      Do not apply direct heat to the mould as this may cause it to lose structural integrity and melt. Application of heat from a torch or heat gun should be carefully directed at the poured resin and not the mould.

·      Avoid the use of tools that will scratch or puncture the mould.

·      Store in a dry location away from direct sunlight.